Mod Kits



the modkit involves the replacement of jp 36 in the Cobra 29 (and similar chassis') 
with a resistor and electrolytic capacitor.  this "modification" will NOT allow the 
transmitter to produce MORE power but LESS. it's initial purpose was to allow the 
alteration of the carrier and peak modulation levels to safely drive an amplifier.  
today this "modification" is used mainly by wanna be radio technicians who lack the 
necessary wherewithall to perform a proper alignment which by the way provides 
higher output levels than this "modkit" does........

another modification usually performed in addition to the above is to bridge or
bypass the 1N4003 at D8. this completely destroys the negative-peak limiting ability
associated with the amc circuit. modifications such as these are destroying your
expensive radio equipment. 



these "modifications" also can be extremely destructive with regard to the final
stage of the transmitter.  if you care about your expensive equipment you do not
want these "modifications" implemented in your radio.